The CAN wiki page

This page collection ¹⁾ is intended to provide shared information about aspects of using the CAN network (http://www.can-cia.org). Every user is invited to not only share information but also provide new details and add information directly on the web. CAN was developed by BOSCH. The BOSCH CAN 2.0 B Specification can be downloaded from CiA. But now the CAN protocol is standardized by the ISO. The ISO 11898 document is the reference for all CAN implementations.

• Part 1 defines the CAN protocol
• part 2 specifies the high-speed (non fault-tolerant) physical layer
• part 3 describes the low-speed fault-tolerant physical layer
• part 4 is under development specifies the time-triggered communication (TTCAN) protocol
• part 5 - High-speed medium access unit with low-power mode - defines the power modes of the high-speed medium access unit (MAU)
• part 6 - High-speed medium access unit with selective wake-up functionality (ISO proposal stage)

• CAN FAQ
• CAN Literature
• CAN Links
• CAN Controllers
• CAN Physical layer
• CAN Interfaces
• CAN Test Equipment
• CAN Higher Layer Protocols