Welcome to the CAN-bus Wiki project

This is an old revision of the document!


**EnergyBus**

The EnergyBus standard is created by the EnergyBus e.V. - http://www.energybus.org

Partners are the CAN in Automation e.V. - http://www.can-cia.org

and the emtas GmbH - http://www.emtas.de

The standard is composed in two parts. One part is the standardisation of hardware, e.g. connectors and the second part is the communication part.

The communication base on CANopen and is realized as CANopen application profile CiA 454.

**Background**

The EnergyBus standardization was started to create an interface between the components of the pedelecs. One of the main goals is to create an interface between the pedelec and the public charger stations. The current situation is, that there are public charger stations, but you require your own charger. But charger with a high charge current are weighty.

But now, the standard is very flexible, also the EnergyBus standard is creating for devices, like caravan, or self-sufficient systems.


QR Code
QR Code can_higher_layer_protocols:energybus (generated for current page)