Welcome to the CAN-bus Wiki project

This is an old revision of the document!


BOSCH

Try to put the latest devices on top of each section and mark end-of-line products. Only specify the main parameters of the micro controllers and go more into deep with details about the CAN interface. Always try to put a link to the data sheet or manual.

8 bit Controllers

16 bit Controllers

32 bit Controllers

DSPs

Stand alone CAN Controllers / IP Cores

Bosch CAN IP license conditions as of 05/2014. It lists currently only the following IP cores:

  • M_CAN: Supports CAN, full CAN FD (up to 64 byte payload) and TTCAN
  • D_CAN: Support of CAN
  • C_CAN FD8: Support of CAN and CAN FD8 (up to 8 byte payload)

Attention Heinz-Jürgen Oertel 2015/08/09 12:45 Bosch has changed all document locations

  • http://www.can.bosch.com/content/A_CAN.html Bosch A_CAN?; The A_CAN? is a CAN module that can be integrated as stand-alone device or as part of an ASIC. It is described in VHDL on RTL level, prepared for synthesis. 3 message buffers.
  • The Bosch C_CAN is a CAN module that can be integrated as stand-alone device or as part of an ASIC. It is described in VHDL on RTL level, prepared for synthesis. 32 message buffers. Read more here.
    The PDF User Manual.
  • Bosch CC750 Datasheets CAN-Controller with SPI-Interface CC750; 15 message objects of 8-byte data lengt
  • Bosch CC770 Datasheets Stand-Alone CAN-Controller CC770 (comaptible to AN82527); 15 message objects of 8-byte data length; Flexible CPU interface: 1 x SPI, 4 x parallel bus, 2 x 8 bit IO.

QR Code
QR Code controllers:bosch (generated for current page)