Welcome to the CAN-bus Wiki project

Differences

This shows you the differences between two versions of the page.

--- controllers:dcd [2018/08/21 23:09] – external edit 127.0.0.1
+++ controllers:dcd [2021/02/03 22:37] (current) – link corrected heinz
@@ Line 5: / Line 5: @@
 Digital Core Design (DCD), founded in 1999, is a leading Intellectual Property (IP) Core provider and System-on-Chip (SoC) design house.
-  * [[http://www.dcd.pl/ipcore/131/dcan-fd/ | DCAN FD]] is a standalone CAN controller. It conforms to Bosch CAN 2.0B specification (2.0B Active) and CAN FD (not ISO11898-1:2015 ?). \\ The core has a simple CPU interface (8/16/32 bit configurable data width), with small or big endian addressing scheme. Hardware message filtering and 128 byte receive FIFO enable back-to-back message reception, with minimum CPU load. The DCAN FD is described at RTL level, allowing target use in FPGA or ASIC technologies.
+  * [[https://www.dcd-semi.com/product/dcan-fd/ | DCAN FD]] is a standalone CAN controller. It conforms to Bosch CAN 2.0B specification (2.0B Active) and CAN FD (not ISO11898-1:2015 ?). \\ The core has a simple CPU interface (8/16/32 bit configurable data width), with small or big endian addressing scheme. Hardware message filtering and 128 byte receive FIFO enable back-to-back message reception, with minimum CPU load. The DCAN FD is described at RTL level, allowing target use in FPGA or ASIC technologies.

Trace: