Welcome to the CAN-bus Wiki project

Freescale Controller

Try to put the latest devices on top of each section and mark end-of-line products. Only specify the main parameters of the micro controllers and go more into deep with details about the CAN interface. Always try to put a link to the data sheet or manual.

8 bit Controllers

16 bit Controllers

  • S12G is an optimized, automotive, 16-bit product line focused on low-cost, high-performance and low pin-count. The S12G is suited for automotive body applications requiring CAN (msCAN12) or LIN/SAE J2602 communication. MC9S12G Family Reference Manual PDF
  • S12ZVC provide one msCAN on-chip module plus an integrated CAN transceiver.
    Freescale names it: S12 MagniV Mixed-Signal MCU for CAN Applications.

32 bit Controllers

Kinetis KV5x

Kv5x Cortex©-M7 family

Kinetis

Kinetis MCUs L- Series

exceptional energy-efficient and ease-of-use 32-bit ARM® Cortex®-M0+ processor

KL0

Baseline MCUs

KL1x

General Purpose MCUs

KL2x

USB MCUs

KL3x

Segment LCD MCUs

KL4x

USB and Segment LCD MCUs

Kinetis MCUs K- Series

Kinetis K high-performance 32-bit MCUs built on the ARM® Cortex®-M4 core.

K10

Baseline MCUs

K20

USB MCUs with optional FlexCAN

K30

Segment LCD MCUs

K40

USB & Segment LCD MCUs

K50

Measurement MCUs

K60

Ethernet Crypto MCUs with optional FlexCAN

K70

Graphic LCD MCUs

i.MX

Architectural Differences between the i.MX23, i.MX25, and i.MX28 This application note describes the key architectural differences between the i.MX23, i.MX25, and i.MX28 ARM® based 32-bit applications processors. This application note provides an overview on several aspects of these processors which includes core, security, peripherals, and connectivity. It compares the different features of the processors.

i.MX286

Features

  • 454MHz ARM926EJ-S core with 16KB/32KB Cache
  • PMU with high efficiency on-chip DC/DC, supports Li-Ion batteries
  • 10/100 IEEE® 1588 Ethernet with RMII support
  • Dual CAN interfaces, FlexCAN2
  • LCD Controller with Touchscreen
  • NAND support – SLC/MLC and eMMC 4.4 managed
  • Hardware BCH (up to 20-bit correction)
  • 200 MHz 16-bit DDR2, LV-DDR2, mDDR external memory support
  • Dual High speed USB with embedded PHY
  • 8 General purpose 12-bit ADC channels and single 2 Msps ADC channel
  • Temperature sensor for thermal protection
  • Multiple connectivity ports (UARTs, SSP, SDIO, SPI, I2C, I2S)
  • 3.3V I/O, 10 year lifetime (Industrial)
  • Package and Temperature
    • 289 BGA 14x14mm .8mm
    • -20C to +70C (Consumer)
    • -40C to +85C (Industrial)

i.MX6

  • i.MX6Solo Single Core Cortey-A9 @1GHz, integrated LVDS, MIPI display, MIPI camera port, HDMI v1.4, 2xFlexCAN and MediaLB (Media Local Bus). Controller for consumer, automotive and industrial applications. The i.MX 6SoloLite (i.MX6SL) does not have the FlexCAN module.

Vybrid micro-controller series

a new family of dual core controllers (ARM Cortex-A5 and Cortex-M4). All family members do have 2x FlexCAN modules

Qoriq

Qoriq LS1 family of Cortex A7 based MCUs implementing up to four FlexCAN modules dedicated for non-automotive applications. Interesting, LS means Layerscape architecture.

  • LS1020A for fanless networking devices such as gateways and access points,
  • LS1021A for factory and building automation,
  • LS1022A for power-sensitive industrial applications

Qorivva

Qorivva 32-bit MCUs based on Power Architecture® Technology (core e200z0h)

  • Qorivva MPC5604P Pictus, one FlexCAN, 32 message buffers, and one additional FlexCAN module called Safety port which can be used with bit rates as fast as 7.5 Mbit/s at 60 MHz CPU clock using direct connection between CAN modules (no physical transceiver required.)
  • Qorivva MPC5748G :-) is equipped with seven FlexCAN interfaces, which support the improved CAN protocol (also known as CAN FD). In addition, the MCU provides one FlexCAN port for pretended networking. The MCU complies with the ISO 26262 automotive safety standard and fulfills ASIL B compliancy.
  • MPC564 Three TouCAN modules (MPC561, 562/563/564)

DSPs

Some members of the 56K family, like

MPC 500 Family

All members of this family introduced in 2002 are implementing one or more TouCAN modules.

Stand alone CAN Controllers

Application specific

  • MM9Z1J638 Battery Sensor with CAN (msCAN) and LIN. Wide range battery current measurement; on-chip temperature measurement. It features a HCSS12Z micro controller with 96/128 kByte Flash, 8.0 kByte RAM, 4.0 kByte EEPROM.

QR Code
QR Code controllers:freescale (generated for current page)