Welcome to the CAN-bus Wiki project

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

controllers:hms [2013/01/21 16:47]
heinz [SoC] added NP40
controllers:hms [2018/08/21 23:09]
Line 1: Line 1:
-====== HMS ====== 
- 
-Try to put the latest devices on top of each section and mark end-of-line products. Only specify the main parameters of the micro controllers and go more into deep with details about the CAN interface. Always try to put a link to the data sheet or manual. 
- 
-===== SoC ===== 
- 
-Is it more a SOC or a standard Micro ? 
- 
-  * [[http://​www.anybus.com/​technologies/​network_processors.shtml | AnyBus NP40(tm)]] network processor. Includes all major network protocols: CAN/​CANopen/​DeviceNet,​ Modbus, Profibus, Profinet, Ethernet/​IP,​ EtherCAT, POWERLINK, Modbus-TCP, Bacnet/​IP.\\ Based on a Cortex-M3 CPU and flexible FPGA array. 
- 
- 
-===== FPGA ====== 
- 
-===== 8 bit Controllers ===== 
- 
- 
-===== 16 bit Controllers ===== 
- 
- 
-===== 32 bit Controllers ===== 
- 
- 
-===== DSPs ===== 
- 
- 
-===== Stand alone CAN Controllers ===== 
  

QR Code
QR Code controllers:hms (generated for current page)