Welcome to the CAN-bus Wiki project

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revisionBoth sides next revision
controllers:nxp [2018/10/25 13:49] – [32 bit Controllers] added i.MX RT1060] heinzcontrollers:nxp [2020/05/04 11:32] – [32 bit Controllers] added LPC55S1x/LPC551x heinz
Line 11: Line 11:
  
 ===== 32 bit Controllers ===== ===== 32 bit Controllers =====
 +  * [[ https://www.nxp.com/products/processors-and-microcontrollers/arm-microcontrollers/general-purpose-mcus/lpc5500-cortex-m33/lpc551x-s1x-baseline-arm-cortex-m33-based-microcontroller-family:LPC551X-S1X | LPC55S1x/LPC551x  ]]ARM Cortex-M33 based MCU family, up to 256 KB on-chip flash, up to 96 KB of on-chip SRAM, @up to 150 MHz. CASPER Crypto co-processor, Flexcomm Interface for SPI. I2C, I2S, USART. USb-2 Interfaces,  CAN FD module with dedicated DMA controller and  ISO 11898-1 :-) \\ LPC55S16-EVK LPCXpresso55S16 Development Board **with** CAN **Transceiver**
   * [[ https://www.nxp.com/products/processors-and-microcontrollers/arm-based-processors-and-mcus/i.mx-applications-processors/i.mx-rt-series/i.mx-rt1060-crossover-processor-with-arm-cortex-m7-core:i.MX-RT1060|  i.MX RT1060]] so called Cross-Over processor, 2x classic CAN, 1x CAN FD, ARM Cortex-M7@ 600 MHz, 1MB On-Chip SRAM - up to 512KB configurable as Tightly Coupled Memory (TCM), Low-power run modes at 24MHz. :-)   * [[ https://www.nxp.com/products/processors-and-microcontrollers/arm-based-processors-and-mcus/i.mx-applications-processors/i.mx-rt-series/i.mx-rt1060-crossover-processor-with-arm-cortex-m7-core:i.MX-RT1060|  i.MX RT1060]] so called Cross-Over processor, 2x classic CAN, 1x CAN FD, ARM Cortex-M7@ 600 MHz, 1MB On-Chip SRAM - up to 512KB configurable as Tightly Coupled Memory (TCM), Low-power run modes at 24MHz. :-)
  

QR Code
QR Code controllers:nxp (generated for current page)