Welcome to the CAN-bus Wiki project

This is an old revision of the document!


Try to put the latest devices on top of each section and mark end-of-line products. Only specify the main parameters of the micro controllers and go more into deep with details about the CAN interface. Always try to put a link to the data sheet or manual.

http://semiconductors.philips.com/pip/SJA1000.html Philips SJA1000 Datasheet

8 bit Controllers

16 bit Controllers

32 bit Controllers

  • LPC408x and LPC407x micro-controllers based on ARM Cortex-M4 processor
    Operating at up to 120 MHz, 512 KiB of flash, 96 KiB of SRAM, 4 KiB of EEPROM. Two CAN controllers. LQFP packages with 80, 144 or 208 pins and in TFBGA packages with 180 or 208 pins.

DSPs

Stand alone CAN Controllers

  • SJA1000 Philips SJA1000 Datasheet
  • SJA1000 Stand-alone CAN controller Application note AN97076
  • SJA1145 CAN FD protocol controller with on-chip transceiver and supports 64 byte data fields. The transceiver is compliant with the TJA1145FD chip and specified for transmission rates up to 2 Mbit/s. Host interface is SPI. It will be available Q3/2013. First information were given in Detroit Oct 2012.

QR Code
QR Code controllers:nxp (generated for current page)