Welcome to the CAN-bus Wiki project

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
drivers:main [2016/05/14 13:34]
heinz [MACOS]
drivers:main [2020/07/20 09:25] (current)
uwilhelm [Windows]
Line 10: Line 10:
 ==== LINUX ==== ==== LINUX ====
  
 +All started with a Linux character device driver, **can4linux**, in the very early years around 1995. This project was born in cooperation with the LINUX LLP Project to control laboratory or automation devices via CAN. LLP stands for Linux Lab Project.
  
-    * [[https://sourceforge.net/projects/can4linux/|can4linux]] one of the first available CAN device drivers for Linux. The project started in 1995 already. [[http://www.can-wiki.info/can4linux/man/index.html|Manual pages]] Doxygen generated. [[wp>can4linux]] +  * char driver 
-    * [[http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=blob_plain;f=Documentation/networking/can.txt|SocketCAN]] is a network layer driver for CAN. It is part of the Linux kernel since some years.+    * [[https://gitlab.com/hjoertel/can4linux |can4linux]] one of the first available CAN device drivers for Linux is hosted on GitLab. The project started in 1995 already. [[http://www.can-wiki.info/can4linux/man/index.html|Manual pages]] Doxygen generated. [[wp>can4linux]]. can4linux is manufacturer independent and has support for EMS Wünsche, Kvaser, Janz Contemporayry Controls and such embedded Linux devices as RaspberryPi, BananaPi, iMX based Linux, Olimex and more. 
 +    * [[ https://www.kvaser.com/linux-drivers-and-sdk/ |Kvaser Linux Drivers and SDK ]] Linux character based driver for all Kvaser products, including the latest CAN FD devices.                            
 +    * [[https://www.peak-system.com/fileadmin/media/linux/index.htm |PEAK-System Technik Linux PCAN Driver]] Linux character based driver for all PEAK-System products, including the latest CAN FD devices.                            
 + 
 +  * net driver 
 +    * [[http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=blob_plain;f=Documentation/networking/can.txt|SocketCAN]] is a network layer driver for CAN. It is part of the Linux kernel since some years. SocketCAN has over the years assembled support for many interfaces boards from different vendors
  
  
Line 19: Line 25:
  
     * EMS Wünsche: [[http://www.ems-wuensche.com/product/datasheet/html/can-software-developmentkit-drivers-linux-windows.html|CPC]] series driver for all Windows operating systems     * EMS Wünsche: [[http://www.ems-wuensche.com/product/datasheet/html/can-software-developmentkit-drivers-linux-windows.html|CPC]] series driver for all Windows operating systems
-    * IXXAT: [[:drivers:www.ixxat.de_download_vci_v3_de.html|VCI]] drivers+    * HMS / IXXAT: [[:drivers:www.ixxat.de_download_vci_v3_de.html|VCI]] drivers 
 +    * [[https://www.kvaser.com/downloads/ | Kvaser]] 
 +    * NI National Instruments  
 +    * [[ http://www.peak-system.com/Downloads.76.0.html | PEAK-System Technik]] drivers and free API for Windows
  
  
 ==== QNX ==== ==== QNX ====
  
 +Look at [[ http://www.qnx.com/ | QNX]]
  
 +  * [[http://www.peak-system.com/QNX-driver.261.0.html?&L=1 | Peak-System ]]
 +  * [[http://www.steinhoff.de/?Fieldbus_Systems_for_Real-Time_Applications___CAN_%2F_CANopen___DACHS%C2%AE_CAN_L2 | Steinhoff Automation]] Supported CAN controllers are e.g. Intel 82527 or Bosch CC770, SJA 1000, and MSCAN on MPC5200, with the [[http://www.emtas.de/en/produkte/canopen-master-stack | emtas GmbH]] CANopen protocol
 ==== VxWorks ==== ==== VxWorks ====
  
- +  * [[http://www.emtas.de | emtas GmbH]] Supported CAN controllers are msCAN on MPC5200, with CANopen higher layer 
-    * [[http://www.port.de|port]] offers an version for SJA1000 based CAN controllers+  * [[http://www.port.de|port]] offers an version for SJA1000 based CAN controllers
  
 ==== MACOS ==== ==== MACOS ====
  
-  * +  * [[http://aph-le.github.io/can4osx/ | can4osx]] User-space driver for OSX using IOKitLib and IOUSBLib CAN to USB Adapters using the Kvaser canlib API. Based on Kvaser canlib linux driver. 
- +  * [[http://www.mac-can.com/ | MacCAN]] OS X Library for PEAK-System PCAN-USB Interfaces using Apple´s IOUSBKit. The library comes with an Objective-C wrapper and a demo App
 ===== Low level CAN driver software ===== ===== Low level CAN driver software =====
  
- +  * [[https://canpie.github.io | CANpie]] - Open source project, pursues the objective of creating and establishing an open and standardized software API for access to the CAN bus 
-[[https://bitbucket.org/hardbyte/python-can|python-can]]- an open source Python library for creating CAN utilities that uses SocketCAN or Kvaser drivers. +  [[https://bitbucket.org/hardbyte/python-can|python-can]]- an open source Python library for creating CAN utilities that uses SocketCAN or Kvaser drivers. 
 +  * [[https://gitlab.com/hjoertel/can4linux/tree/master/can4linux-examples | Tcl binding for can4linux]] 
 +  * [[https://gitlab.com/hjoertel/can4linux/tree/master/can4linux-examples | Python binding for can4linux ]]

QR Code
QR Code drivers:main (generated for current page)