Welcome to the CAN-bus Wiki project

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
testequipment:cananalyzers [2016/11/21 15:46] – [Commercial] added SavvyCAN heinztestequipment:cananalyzers [2020/07/20 09:13] (current) – [Commercial] uwilhelm
Line 25: Line 25:
   * [[http://www.mhs-elektronik.de/tiny_can.html| MHS-Elektronik GmbH? & Co. KG ]] Tiny-CAN View, GNU Open Source CAN analyzer   * [[http://www.mhs-elektronik.de/tiny_can.html| MHS-Elektronik GmbH? & Co. KG ]] Tiny-CAN View, GNU Open Source CAN analyzer
   * [[http://www.ni.com/can| National Instruments ]] Create your custom Bus Analyzer with NI LabVIEW   * [[http://www.ni.com/can| National Instruments ]] Create your custom Bus Analyzer with NI LabVIEW
-  * [[http://www.peak-system.com/db/gb/pcanExplorer3_gb.html| PEAK-System Technik ]]+  * [[https://www.peak-system.com/PCAN-Explorer.362.0.html?&L=1| PEAK-System Technik PCAN-Explorer Family  with optional, CANdb, J1939, Instrument Panel, Plotter]]
   * [[http://www.port.de/engl/canprod/sw_report.html| port]] CAN-REport with the special feature to be programmable by an scripting language [[wp>Tcl/Tk]]. [[http://www.canexperts.de/engl/canprod/sw_report.html|http://www.canexperts.de/engl/canprod/sw_report.html]]. Plug-In for DeviceNet, J1939 (SaeJ1939) and [[:can_higher_layer_protocols:canopen|CANopen]] available. See also CanReport.   * [[http://www.port.de/engl/canprod/sw_report.html| port]] CAN-REport with the special feature to be programmable by an scripting language [[wp>Tcl/Tk]]. [[http://www.canexperts.de/engl/canprod/sw_report.html|http://www.canexperts.de/engl/canprod/sw_report.html]]. Plug-In for DeviceNet, J1939 (SaeJ1939) and [[:can_higher_layer_protocols:canopen|CANopen]] available. See also CanReport.
   * [[http://www.savvycan.com/ | SavvyCAN]] Qt based Multi platform for OSX, Linux, Windows. Source code at [[https://github.com/collin80/SavvyCAN | GitHub]]   * [[http://www.savvycan.com/ | SavvyCAN]] Qt based Multi platform for OSX, Linux, Windows. Source code at [[https://github.com/collin80/SavvyCAN | GitHub]]
Line 50: Line 50:
     * CAN Frame Logger [[http://www.dmcinfo.com|http://www.dmcinfo.com]] [[http://www.dmcinfo.com/Case-Studies/View/ProjectID/234/CAN---Controller-Area-Network---Streaming-Data-Recorder.aspx|http://www.dmcinfo.com/Case-Studies/View/ProjectID/234/CAN---Controller-Area-Network---Streaming-Data-Recorder.aspx]]     * CAN Frame Logger [[http://www.dmcinfo.com|http://www.dmcinfo.com]] [[http://www.dmcinfo.com/Case-Studies/View/ProjectID/234/CAN---Controller-Area-Network---Streaming-Data-Recorder.aspx|http://www.dmcinfo.com/Case-Studies/View/ProjectID/234/CAN---Controller-Area-Network---Streaming-Data-Recorder.aspx]]
     * [[http://www.vector.com/vi_canstress_de.html|CANstress]] Vector Informatik. CANstress is a standalone hardware module that is inserted directly onto the CAN bus. It contains various triggering conditions and disturbance logic. The fully equipped module includes a number of resistors that can be software-controlled. These resistors are used to force different bus levels onto the bus lines by limiting the voltage supplied.     * [[http://www.vector.com/vi_canstress_de.html|CANstress]] Vector Informatik. CANstress is a standalone hardware module that is inserted directly onto the CAN bus. It contains various triggering conditions and disturbance logic. The fully equipped module includes a number of resistors that can be software-controlled. These resistors are used to force different bus levels onto the bus lines by limiting the voltage supplied.
 +    * [[http://www.peak-system.com/PCAN-Diag-2.231.0.html?&L=1| PCAN-Diag 2 CAN Tester ]] Tester/2 Channel Scope for the electrical signal quality of CAN 2.0a/b Networks, CAN-Termination measuring, Voltage check etc. incl. Layer2 send/transmit of RAW CAN Frames or using CAN Symbol Files
 +    * [[https://www.peak-system.com/PCAN-Diag-FD.456.0.html?&L=1| PCAN-Diag FD CAN Tester ]] Tester/2 Channel Scope for the electrical signal quality of CAN 2.0a/b and CAN-FD Networks, CAN-Termination measuring, Voltage check etc. incl. Layer2 send/transmit of RAW CAN Frames or using CAN Symbol Files
 +    * [[https://www.peak-system.com/PCAN-MiniDiag-FD.490.0.html?&L=1| PCAN-miniDiag FD CAN Tester ]] Simple CAN-FD Network Tester with auto bitrate detection, Termination measuring, physical Busload measuring etc.
 +
  
 ---- ----

QR Code
QR Code testequipment:cananalyzers (generated for current page)