Welcome to the CAN-bus Wiki project

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
testequipment:cananalyzers [2018/08/21 23:09]
127.0.0.1 external edit
testequipment:cananalyzers [2020/07/20 09:13] (current)
uwilhelm [Commercial]
Line 25: Line 25:
   * [[http://www.mhs-elektronik.de/tiny_can.html| MHS-Elektronik GmbH? & Co. KG ]] Tiny-CAN View, GNU Open Source CAN analyzer   * [[http://www.mhs-elektronik.de/tiny_can.html| MHS-Elektronik GmbH? & Co. KG ]] Tiny-CAN View, GNU Open Source CAN analyzer
   * [[http://www.ni.com/can| National Instruments ]] Create your custom Bus Analyzer with NI LabVIEW   * [[http://www.ni.com/can| National Instruments ]] Create your custom Bus Analyzer with NI LabVIEW
-  * [[http://www.peak-system.com/db/gb/pcanExplorer3_gb.html| PEAK-System Technik ]]+  * [[https://www.peak-system.com/PCAN-Explorer.362.0.html?&L=1| PEAK-System Technik PCAN-Explorer Family  with optional, CANdb, J1939, Instrument Panel, Plotter]]
   * [[http://www.port.de/engl/canprod/sw_report.html| port]] CAN-REport with the special feature to be programmable by an scripting language [[wp>Tcl/Tk]]. [[http://www.canexperts.de/engl/canprod/sw_report.html|http://www.canexperts.de/engl/canprod/sw_report.html]]. Plug-In for DeviceNet, J1939 (SaeJ1939) and [[:can_higher_layer_protocols:canopen|CANopen]] available. See also CanReport.   * [[http://www.port.de/engl/canprod/sw_report.html| port]] CAN-REport with the special feature to be programmable by an scripting language [[wp>Tcl/Tk]]. [[http://www.canexperts.de/engl/canprod/sw_report.html|http://www.canexperts.de/engl/canprod/sw_report.html]]. Plug-In for DeviceNet, J1939 (SaeJ1939) and [[:can_higher_layer_protocols:canopen|CANopen]] available. See also CanReport.
   * [[http://www.savvycan.com/ | SavvyCAN]] Qt based Multi platform for OSX, Linux, Windows. Source code at [[https://github.com/collin80/SavvyCAN | GitHub]]   * [[http://www.savvycan.com/ | SavvyCAN]] Qt based Multi platform for OSX, Linux, Windows. Source code at [[https://github.com/collin80/SavvyCAN | GitHub]]
Line 50: Line 50:
     * CAN Frame Logger [[http://www.dmcinfo.com|http://www.dmcinfo.com]] [[http://www.dmcinfo.com/Case-Studies/View/ProjectID/234/CAN---Controller-Area-Network---Streaming-Data-Recorder.aspx|http://www.dmcinfo.com/Case-Studies/View/ProjectID/234/CAN---Controller-Area-Network---Streaming-Data-Recorder.aspx]]     * CAN Frame Logger [[http://www.dmcinfo.com|http://www.dmcinfo.com]] [[http://www.dmcinfo.com/Case-Studies/View/ProjectID/234/CAN---Controller-Area-Network---Streaming-Data-Recorder.aspx|http://www.dmcinfo.com/Case-Studies/View/ProjectID/234/CAN---Controller-Area-Network---Streaming-Data-Recorder.aspx]]
     * [[http://www.vector.com/vi_canstress_de.html|CANstress]] Vector Informatik. CANstress is a standalone hardware module that is inserted directly onto the CAN bus. It contains various triggering conditions and disturbance logic. The fully equipped module includes a number of resistors that can be software-controlled. These resistors are used to force different bus levels onto the bus lines by limiting the voltage supplied.     * [[http://www.vector.com/vi_canstress_de.html|CANstress]] Vector Informatik. CANstress is a standalone hardware module that is inserted directly onto the CAN bus. It contains various triggering conditions and disturbance logic. The fully equipped module includes a number of resistors that can be software-controlled. These resistors are used to force different bus levels onto the bus lines by limiting the voltage supplied.
 +    * [[http://www.peak-system.com/PCAN-Diag-2.231.0.html?&L=1| PCAN-Diag 2 CAN Tester ]] Tester/2 Channel Scope for the electrical signal quality of CAN 2.0a/b Networks, CAN-Termination measuring, Voltage check etc. incl. Layer2 send/transmit of RAW CAN Frames or using CAN Symbol Files
 +    * [[https://www.peak-system.com/PCAN-Diag-FD.456.0.html?&L=1| PCAN-Diag FD CAN Tester ]] Tester/2 Channel Scope for the electrical signal quality of CAN 2.0a/b and CAN-FD Networks, CAN-Termination measuring, Voltage check etc. incl. Layer2 send/transmit of RAW CAN Frames or using CAN Symbol Files
 +    * [[https://www.peak-system.com/PCAN-MiniDiag-FD.490.0.html?&L=1| PCAN-miniDiag FD CAN Tester ]] Simple CAN-FD Network Tester with auto bitrate detection, Termination measuring, physical Busload measuring etc.
 +
  
 ---- ----

QR Code
QR Code testequipment:cananalyzers (generated for current page)