can_higher_layer_protocols:what_is_wrong_with_rtr

Welcome to the CAN-bus Wiki project

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

===== Why using RTRs is not advised in CANopen? =====

RTR means //Remote Transmission Request// - a CAN frame requesting another node to send a requested frame.

CiA, especially the Special Interest Group CANopen is not recommending using RTR Messages. You may ask: why?

The CiA has a paper explaining the contras and giving advice for better solutions. CiA 802 V1.1.0: CANopen application note - CAN remote frames: Avoiding of usage (IGCO_802v01010000.pdf) \\ It can be downloaded free of charge after a registration at  [[http://www.can-cia.org/index.php?id=specifications| CiA specifications]]. 
 
In short the main topics:

    * The number of transmit messages buffers supporting CAN remote frames is limited on most so-called [[can_faq_basic_full| FullCAN ]] controllers.
    * Implementation of a CAN driver handling RTR is much more complex. On some controllers impossible.
    * Some CAN controllers react different on the 'data length' code in the RTR frame and the data frame. This is due to differences in the CAN implementation.  \\

Trace: • canopen_faq • j1939 • gigadevice • gridconnect • xdd_example • main

Navigation

Search

Toolbox

QR Code