can_interfaces:ethernet

Welcome to the CAN-bus Wiki project
This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
===== Ethernet/CAN =====

==== Analytica ====
[[http://www.anagate.de/en | Analytica]]

  * [[http://www.anagate.de/en/products/can-ethernet-gateways.htm | Analytica]] AnaGate CAN/Ethernet gateways for commercial and industrial use with 1, 2, 4 and 8 CAN interfaces (Linux based, extendable via GCC or scripting language [[http://en.wikipedia.org/wiki/LUA|LUA]]).
  * [[http://www.anagate.de/en/products/can-ethernet-gateways.htm | Analytica]] [[ http://www.anagate.de/en/products/AnaGateCANX4_Data.htm | AnaGate CAN X4]] CAN/Ethernet gateways up to four CAN interfaces implemented in FPGA, SJA1000 like, ARM9 (32Bit, 400 MHz), Linux OS
  * 

==== EMS Wünsche ====
 
  * [[http://www.ems-wuensche.com/product/datasheet/html/can-ethernet-embedded-linux-gateway-converter-eci.html| EMS Wuensche]] Ethernet to CAN Interface or Gateway, ARM7 based, one CAN interface
  * [[ http://www.ems-wuensche.com/product/datasheet/html/can-ethercan-arm9.html | EMS Wuensche]] Ethernet to CAN Interface or Gateway, 454 MHZ ARM9 CPU (Freescale I.MX287) based with two CAN Interfaces. SD Card slot and USB host interface.
  * [[ http://www.ems-wuensche.com/product/datasheet/html/can-ethernet-embedded-linux-development-mobile-ecma.html | EMS Wuensche]] Ethernet/CAN-Gateway for Mobile Applications, 6 CAN channels with SJA1000 

==== ESD ====
  * [[ http://www.esd-electronics.com | ESD]]  - Ether-CAN CAN over Ethernet

==== IXXAT / HMS ====
  * IXXAT [[ http://www.ixxat.com/can-at-net-vci_ethernet-gateway_en.html| CAN@net II]]: PC interfaces for CAN with common Windows driver API. Can also be used as bridge between CAN systems or in generic version to access CAN systems via non Windows platforms.

==== JanzTec ====
[[http://www.janz.de | JanzTec ]] - Different embedded hardware for CAN/Ethernet connection. **All** emPC devices can operate Linux

  * [[https://www.janztec.com/en/products/embedded-computing/empc/empc-arpi/ | emPC-A/RPI]] Embedded Controller based on Raspberry Pi 2 with industrial features, 1 X CAN, digital I/O
  * [[ https://ww.janztec.com/en/products/embedded-computing/empc/empc-aimx6/ | emPC-A/iMX6]] ARM Freescale i.MX6 based embedded controller, 1 x 10/100/1000 MBit/s Ethernet, 2 x USB (v2.0), with 500 mA power supply capability up t0 4 x 9-pin D-SUB connectors for CAN 
  * [[  https://www.janztec.com/en/products/embedded-computing/empc/empc-a500/ | emPC-A500]] ARM Freescale i.MX515 based embedded controller, 2 x 10/100 MBit/s Ethernet (RJ45 connectors), 2 x USB (v2.0), with 500 mA power supply capability, 2 x 9-pin D-SUB connectors for CAN or serial ports
  * [[https://www.janztec.com/en/products/embedded-computing/empc/empc-cx/ | emPC-CX+]] CPU technology from Intel Atom up to Intel Core i7, fanless cooling, 2 x 10/100/1000 MBit/s Ethernet RJ45 connectors, 4 x USB host connection, USB 2.0 or USB 3.02, up to 2 x isolated CAN/CANopen ports using SJA1000 CAN Controller 
  * [[ https://www.janztec.com/en/products/embedded-computing/empc/empc-cxr/  | emPC-CXR]] Embedded computing system for harsh and dusty environments, 2 x M12 8 pin X-coded connectors for 10/100/1000BaseT Ethernet, 2 x M12 5 pin connectors for CAN (SJA1000) or serial ports, 2 x M8 4 pin connectors for USB, -40 °C ... +70 °C, **IP67** 
  * [[ https://www.janztec.com/en/products/embedded-computing/empc/empc-x/  | emPC-X]] x86 Intel Atom E38xx based embedded controller, 2 x 10/100/1000 MBit/s Ethernet, 3 x USB 2.0, 2 x 9-pin D-SUB connectors for CAN or serial ports



==== RM Michealides ====
[[https://proemion.com/ |  PROEMION Telematic Systems]] aka Robert Michaelides.

  * [[https://proemion.com/canview-ethernet-158.html | CANview Ethernet]] rev 2301, 16bit controller, 1x 10/100 Mbit Ethernet M12 4-pin, 1 CAN galv. isolated. M12 5-pin, firmware extensions via C-Compiler
  * [[https://proemion.com/canview-ethernet-158.html | CANview Ethernet]] rev 2001, 16bit controller, 1x 10/100 Mbit Ethernet RJ45, 1 CAN DSUB-9, firmware extensions via C-Compiler

==== Sontheim ====
[[http://www.sontheim-industrie-elektronik.de/ | Sontheim]]

  * [[http://www.sontheim-industrie-elektronik.de/produkte/ecu/esys-idc4e1.html | eSys-IDC4E1]],  1x Ethernet, 10/100Mbit RJ45, 4 CAN channels DSUB-9 galv. isolated, CAN to CAN, CAN to Ethernet, Freescale Power PC @400 MHz,  0...60 °C\\ OS ??\\ [[http://www.sontheim-industrie-elektronik.de/fileadmin/userdata/dokumente/Flyer14_DE/PF_eSys-IDC4E1_DE.pdf | Flyer]]

==== SSV ====

  * [[http://www.ssv-comm.de/en/products/igw900.php | SSV]] IGW/900 Linux Device Server with CAN (can4linux)
Trace: • ethernet • tclscripts • can_transceivers • problem_solving_questions • main • canopenextendedidusage • xilinx • espressif • st_microelectronics • canmd
Navigation

Search

Toolbox

QR Code
