controllers:twin_can

Welcome to the CAN-bus Wiki project

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

==== Infineon TwinCAN ====

TwinCan is a new CAN controller developed by Infineon. It's available as stand alone chip, called  SAK82C900 and in the new series of 16-bit controllers C166S, like the XC164CS(http://www.infineon.com/cgi/ecrm.dll/ecrm/scripts/prod_ov.jsp?oid=31260&cat_oid=-8144) and XC161CJ(http://www.infineon.com/cgi/ecrm.dll/ecrm/scripts/prod_ov.jsp?oid=31150&cat_oid=-8144).

There is an errata sheet for the current AB-stepping on the Infineon pages whith some 'known bugs'.
----

It is not correct, that the parallel interface is buggy in such a way, that it cannot be used. It is correct, that the timing from WR high to ALE high is 10TCAN and for some uCs this means, that the code for writing onto the 82C900 must be in internal memory.\\ Ursula Kelling mailto:Ursula.Kelling@infineon.com
----

Work is ongoing to support the TwinCAN with the can4linux device driver. The first supported platform will be the UNC20 with the UNCBASCAN board http://www.unc20.net  Which now seems to be renamed to [[ http://www.digi.com  | Digi ConnectCore 7U]]
----

The next generation of this CAN Controller is MultiCAN.

Trace: • samsung • canmd • main • start • st_microelectronics • toshiba • can_fd • main • infineon • arasan

Navigation

Search

Toolbox

QR Code