Spansion microcontrollers took over Fujitsu FMEA in 2013.

Try to put the latest devices on top of each section and mark end-of-line products. Only specify the main parameters of the micro controllers and go more into deep with details about the CAN interface. Always try to put a link to the data sheet or manual.

Years age there was a short form catalogue of all Fujitsu CAN controllers available. Where is it now?

• FM3 MCU family based on Cortex-M3,
  • MB9 [AB] Fx, where x is
    • 1: Without USB/CAN
    • 4: With CAN
    • 5: With USB & CAN
    • D: Dual EtherMAC & USB & CAN
  • MB9BF506A for inverter control.
  • MB9B520M Series (PDF) max. 2 CAN channels.
  • MB9A420L/120L Series Features CAN Communications, Energy-efficiency
• FM4 MCU family based on Cortex-M4
• FM0+ MCU Family based on Cortex-M0+ (does this family have CAN members?)

• Traveo family of ARM Cortex R5 based dual-core controllers @200 MHz. Three CAN channels. Already CAN FD

• FCR4 Cortex-R4 based family with 3 CAN interfaces implementing the BOSCH C_CAN.
  • MB9DF126 Atlas
  • MB9DF125 Atlas-L
  • MB9EF226 Titan