| Both sides previous revisionPrevious revisionNext revision | Previous revisionNext revisionBoth sides next revision |
| controllers:texas_instruments [2018/01/13 13:16] – [Stand alone CAN Controllers] TCAN 4550 added heinz | controllers:texas_instruments [2018/10/04 23:24] – heinz |
|---|
| |
| * [[http://www.ti.com/ww/de/mcu/concerto/index.shtml|Concerto]] [[http://www.ti.com/lit/gpn/f28m35h52c|F28M3x (PDF)]], Dual-subsystem MCUs, ARM Cortex-M3™ core with C2000’s C28x core on to one device. Two CAN controllers (Bosch [[http://www.semiconductors.bosch.de/en/ipmodules/can/canipmodules/d_can/d_can.asp| D_CAN IP]]) are connected to the Cortex-M3 core. 32 message objects. Programmable FIFO mode for message objects. Automatic bus on after Bus-Off state by a programmable 32-bit timer. | * [[http://www.ti.com/ww/de/mcu/concerto/index.shtml|Concerto]] [[http://www.ti.com/lit/gpn/f28m35h52c|F28M3x (PDF)]], Dual-subsystem MCUs, ARM Cortex-M3™ core with C2000’s C28x core on to one device. Two CAN controllers (Bosch [[http://www.semiconductors.bosch.de/en/ipmodules/can/canipmodules/d_can/d_can.asp| D_CAN IP]]) are connected to the Cortex-M3 core. 32 message objects. Programmable FIFO mode for message objects. Automatic bus on after Bus-Off state by a programmable 32-bit timer. |
| | |
| | ===== 64 bit Controllers ===== |
| | AM654 SoC TI AM654 “Keystone III” quad core Arm Cortex-A53 + dual lockstep Cortex-R5F processor. with dual dual CAN-FD using Bosch M_CAN. First information [[https://www.cnx-software.com/2018/10/04/texas-instruments-am654-64-bit-arm-processor/ | here]]. |
| | |
| | |
| | |
| | |
| | |
| |
| ===== DSPs ===== | ===== DSPs ===== |
| * Programmable FIFO mode for message objects | * Programmable FIFO mode for message objects |
| ==== Mixed ==== | ==== Mixed ==== |
| [[ www.ti.com/c28x_arm_cortex-m3 | F28M3x]] dual-subsystem microcontroller combines an ARM Cortex-M3™ core with the C28x core on to one device. The C28x with up to 150MHz is optimized for Real-time control. The M3x with up to 100MHz is optimized for Host communications: Ethernet, USB, CAN, UART, SPI, I2C and Scheduling and Operating Systems. The Cortex M3 CPU has two CAN channels.\\ See above **Concerto** family. | [[ http://www.ti.com/c28x_arm_cortex-m3 | F28M3x]] dual-subsystem microcontroller combines an ARM Cortex-M3™ core with the C28x core on to one device. The C28x with up to 150MHz is optimized for Real-time control. The M3x with up to 100MHz is optimized for Host communications: Ethernet, USB, CAN, UART, SPI, I2C and Scheduling and Operating Systems. The Cortex M3 CPU has two CAN channels.\\ See above **Concerto** family. |
| |
| |
