Welcome to the CAN-bus Wiki project

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
controllers:texas_instruments [2018/01/13 13:17]
heinz [Mixed] link corrected
controllers:texas_instruments [2018/10/04 23:28] (current)
heinz [64 bit Controllers] link to reference manual
Line 55: Line 55:
  
     * [[http://​www.ti.com/​ww/​de/​mcu/​concerto/​index.shtml|Concerto]] [[http://​www.ti.com/​lit/​gpn/​f28m35h52c|F28M3x (PDF)]], Dual-subsystem MCUs, ARM Cortex-M3™ core with C2000’s C28x core on to one device. Two CAN controllers (Bosch [[http://​www.semiconductors.bosch.de/​en/​ipmodules/​can/​canipmodules/​d_can/​d_can.asp| D_CAN IP]]) are connected to the Cortex-M3 core. 32 message objects. Programmable FIFO mode for message objects. Automatic bus on after Bus-Off state by a programmable 32-bit timer.     * [[http://​www.ti.com/​ww/​de/​mcu/​concerto/​index.shtml|Concerto]] [[http://​www.ti.com/​lit/​gpn/​f28m35h52c|F28M3x (PDF)]], Dual-subsystem MCUs, ARM Cortex-M3™ core with C2000’s C28x core on to one device. Two CAN controllers (Bosch [[http://​www.semiconductors.bosch.de/​en/​ipmodules/​can/​canipmodules/​d_can/​d_can.asp| D_CAN IP]]) are connected to the Cortex-M3 core. 32 message objects. Programmable FIFO mode for message objects. Automatic bus on after Bus-Off state by a programmable 32-bit timer.
 +
 +===== 64 bit Controllers =====
 +AM654 SoC TI AM654 “Keystone III” quad core Arm Cortex-A53 + dual lockstep Cortex-R5F processor. with dual dual CAN-FD using Bosch M_CAN. First information [[https://​www.cnx-software.com/​2018/​10/​04/​texas-instruments-am654-64-bit-arm-processor/​ | here]]. And a technical manual [[http://​www.ti.com/​lit/​ug/​spruid7a/​spruid7a.pdf | PDF]].
 +
 +
 +
 +
 +
  
 ===== DSPs ===== ===== DSPs =====

QR Code
QR Code controllers:texas_instruments (generated for current page)