Welcome to the CAN-bus Wiki project

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
controllers:texas_instruments [2018/10/04 23:28]
heinz [64 bit Controllers] link to reference manual
controllers:texas_instruments [2019/06/13 18:36] (current)
heinz [Stand alone CAN Controllers] added TCAN4550
Line 85: Line 85:
  
   * [[http://​www.ti.com/​product/​TCAN4550-Q1 | TCAN 4550]] stand-alone CAN FD protocol controller. On-chip is also a 5-Mbit/s qualified transceiver. common mode range is ±12 V; wake up via remote wake-up using Wake Up Pattern (WUP ISO 11898-2); [[http://​www.aecouncil.com/​AECDocuments.html | ACE Q100]]-qualified -40 °C to +125 °C.  (av. since Jan. 2018) [[http://​www.ti.com/​lit/​ds/​symlink/​tcan4550-q1.pdf | data sheet]]   * [[http://​www.ti.com/​product/​TCAN4550-Q1 | TCAN 4550]] stand-alone CAN FD protocol controller. On-chip is also a 5-Mbit/s qualified transceiver. common mode range is ±12 V; wake up via remote wake-up using Wake Up Pattern (WUP ISO 11898-2); [[http://​www.aecouncil.com/​AECDocuments.html | ACE Q100]]-qualified -40 °C to +125 °C.  (av. since Jan. 2018) [[http://​www.ti.com/​lit/​ds/​symlink/​tcan4550-q1.pdf | data sheet]]
 +
 +
 +===== System Basic Chip =====
 +  * [[http://​www.ti.com/​product/​TCAN4550-Q1 | TCAN4550-Q1]] ​ Automotive-System Basis Chip (SBC), SPI interface with CAN FD :-) controller and transceiver up to 5 Mbit/s; Watchdog-Timer and Failsafe-Modi; ​ integrated 125 mA-LDO (Low-Dropout-Linearregler),​ Wake-up mode; AEC Q100: qualified for automotive applications,​ Temperature grade 1: –40°C to 125°C; CAN FD controller supports both ISO 11898-1:​2015 and Bosch M_CAN Revision 3.2.1.1 ​

QR Code
QR Code controllers:texas_instruments (generated for current page)