| Both sides previous revisionPrevious revisionNext revision | Previous revisionNext revisionBoth sides next revision |
| can_interfaces:main [2016/11/19 17:39] – [PCI Interfaces] heinz | can_interfaces:main [2017/09/29 12:57] – [USB and RS232 to CAN Interfaces] added Kvaser rugged USB interfaces heinz |
|---|
| * [[http://www.ixxat.com/can-gw100_rs232_en.html | CAN-GW100/RS232]]; RS232-CAN Converter; two modes are available for use in CAN and CANopen networks; several CANopen features supported | * [[http://www.ixxat.com/can-gw100_rs232_en.html | CAN-GW100/RS232]]; RS232-CAN Converter; two modes are available for use in CAN and CANopen networks; several CANopen features supported |
| * [[http://www.janz.de| JANZ]] - CAN/CANopen Interface for USB (v1.1/v2.0) | * [[http://www.janz.de| JANZ]] - CAN/CANopen Interface for USB (v1.1/v2.0) |
| * [[http://www.kvaser.com| Kvaser]] - Kvaser Leaf Professional, Kvaser Memorator,\\ Kvaser Leaf Light HS v2 supports CAN FD :-) | * [[http://www.kvaser.com| Kvaser]] - Kvaser Leaf Professional, Kvaser Memorator,\\ Kvaser Leaf Light HS v2 supports CAN FD :-).\\ Since 2017 Kvaser offers the //Next Generation of Rugged Interfaces// Kvaser Leaf Light R v2 and Kvaser USBcan R v2 2xHS; IP65 from -40°C to +70°C. |
| * [[ http://www.can232.com/ | Lawicel]] CANUSB and CAN232 | * [[ http://www.can232.com/ | Lawicel]] CANUSB and CAN232 |
| * [[http://www.mhs-elektronik.de/tiny_can.html|MHS]] Tiny-CAN I - III & GNU-Open Source CAN analyser for Linux and Windows | * [[http://www.mhs-elektronik.de/tiny_can.html|MHS]] Tiny-CAN I - III & GNU-Open Source CAN analyser for Linux and Windows |
| * [[http://www.janz.de | Janz]] - CAN/CANopen Interfaces for PCI based systems with up to 4 channels; | * [[http://www.janz.de | Janz]] - CAN/CANopen Interfaces for PCI based systems with up to 4 channels; |
| * CAN-PCIH 4 channels with IBM PowerPC? 405 | * CAN-PCIH 4 channels with IBM PowerPC? 405 |
| * [[https://www.janztec.com/en/products/boards/cancanopen/can-pcil/ | CAN-PCIL]] non intelligent board, up to 2 interfaces with SJA1000 CAN controller, On-board line termination 120 Ω ; enabled by jumper or software, 2 x diagnostic LEDs (green/yellow) per interface | * [[https://www.janztec.com/en/products/boards/cancanopen/can-pcil/ | CAN-PCIL]] non intelligent board, up to 2 interfaces with SJA1000 CAN controller, On-board line termination 120 Ω ; enabled by jumper or software, 2 x diagnostic LEDs (green/yellow) per interface, [[drivers:main|can4linux]] available |
| * [[https://www.janztec.com/produkte/baugruppen/can-fd/can-pcihfd/ | CAN-PCIH/FD]] FPGA based (Xilinx Zynq XC7Z015, 400 MHz), Up to 4 CAN-FD channels, Bus termination onboard (120 Ohm, software controlled), Data transfer rate up to 4 MBit/s :-) | * [[https://www.janztec.com/produkte/baugruppen/can-fd/can-pcihfd/ | CAN-PCIH/FD]] FPGA based (Xilinx Zynq XC7Z015, 400 MHz), Up to 4 CAN-FD channels, Bus termination onboard (120 Ohm, software controlled), Data transfer rate up to 4 MBit/s :-) |
| * [[http://www.kvaser.com | Kvaser]] - Kvaser PCIcanxII, Kvaser PCIcanx | * [[http://www.kvaser.com | Kvaser]] - Kvaser PCIcanxII, Kvaser PCIcanx |
