| Both sides previous revisionPrevious revisionNext revision | Previous revisionLast revisionBoth sides next revision |
| controllers:nxp [2013/10/19 22:54] – heinz | controllers:nxp [2022/07/19 13:06] – [32 bit Controllers] S32Z and S32E Real-Time Processors heinz |
|---|
| |
| ===== 32 bit Controllers ===== | ===== 32 bit Controllers ===== |
| * [[ http://www.nxp.com/products/microcontrollers/cortex_m0_m0/series/LPC11C00.html#overview | LPC11xx]] 50 MHz Cortex-M0 MCU, Single 3.3 V power supply (2.6 V to 3.6 V), ADC, [[controllers:c_can|C_CAN]] controller.\\ The LPC11C22 and [[ http://www.nxp.com/documents/data_sheet/LPC11CX2_CX4.pdf | LPC11C24]] parts include an on-chip, high-speed CAN transceiver. LQFP48 or HVQFN32 (7mm x 7mm).\\ 32 kB (LPC11Cx4) or 16 kB (LPC11Cx2) on-chip flash program memory and 8 kB SRAM data memory | |
| | * [[https://www.nxp.com/products/processors-and-microcontrollers/s32-automotive-platform/s32z-and-s32e-real-time-processors:S32Z-E-REAL-TIME-PROCESSORS | S32Z and S32E Real-Time Processors]] The S32Z and S32E real-time processors feature Arm® Cortex®-R52 split-lock processors for multi-tenant software integration plus lockstep Arm Cortex-M33 processors for system management, combining multi-core, real-time processing with core-to-pin hardware virtualization. Gigabit Ethernet switch with hardware security and ISO 26262 ASIL D safety. The S32E contains an "Auto Communication Acceleration" module with **24** x FlexCAN FD, The "Connectivity/Interfaces" module has additional 2 x CAN XL. |
| | * [[ https://www.nxp.com/products/processors-and-microcontrollers/arm-microcontrollers/general-purpose-mcus/lpc5500-cortex-m33/lpc551x-s1x-baseline-arm-cortex-m33-based-microcontroller-family:LPC551X-S1X | LPC55S1x/LPC551x ]]ARM Cortex-M33 based MCU family, up to 256 KB on-chip flash, up to 96 KB of on-chip SRAM, @up to 150 MHz. CASPER Crypto co-processor, Flexcomm Interface for SPI. I2C, I2S, USART. USb-2 Interfaces, CAN FD module with dedicated DMA controller and ISO 11898-1 :-) \\ LPC55S16-EVK LPCXpresso55S16 Development Board **with** CAN **Transceiver** |
| | * [[ https://www.nxp.com/products/processors-and-microcontrollers/arm-based-processors-and-mcus/i.mx-applications-processors/i.mx-rt-series/i.mx-rt1060-crossover-processor-with-arm-cortex-m7-core:i.MX-RT1060| i.MX RT1060]] so called Cross-Over processor, 2x classic CAN, 1x CAN FD, ARM Cortex-M7@ 600 MHz, 1MB On-Chip SRAM - up to 512KB configurable as Tightly Coupled Memory (TCM), Low-power run modes at 24MHz. :-) |
| | * [[http://www.nxp.com/products/microcontrollers-and-processors/arm-processors/lpc-cortex-m-mcus/lpc54000-series-cortex-m4-mcus/power-efficient-microcontrollers-mcus-with-advanced-peripherals-based-on-arm-cortex-m4-core:LPC546XX | LPC546XX ]]: Power-Efficient Microcontrollers (MCUs) With Advanced Peripherals Based on ARM® Cortex®-M4 Core, 2x CANFD :-) |
| | * [[http://www.nxp.com/products/microcontrollers/product_series/lpc1100/series/LPC11C00.html | LPC11xx]] 50 MHz Cortex-M0 MCU, Single 3.3 V power supply (2.6 V to 3.6 V), ADC, [[controllers:c_can|C_CAN]] controller.\\ The LPC11C22 and [[ http://www.nxp.com/documents/data_sheet/LPC11CX2_CX4.pdf | LPC11C24]] parts include an on-chip, high-speed CAN transceiver. LQFP48 or HVQFN32 (7mm x 7mm).\\ 32 kB (LPC11Cx4) or 16 kB (LPC11Cx2) on-chip flash program memory and 8 kB SRAM data memory |
| * LPC408x and LPC407x micro-controllers based on ARM Cortex-M4 processor.\\ Operating at up to 120 MHz, 512 KiB of flash, 96 KiB of SRAM, 4 KiB of EEPROM. Two CAN controllers. LQFP packages with 80, 144 or 208 pins and in TFBGA packages with 180 or 208 pins. | * LPC408x and LPC407x micro-controllers based on ARM Cortex-M4 processor.\\ Operating at up to 120 MHz, 512 KiB of flash, 96 KiB of SRAM, 4 KiB of EEPROM. Two CAN controllers. LQFP packages with 80, 144 or 208 pins and in TFBGA packages with 180 or 208 pins. |
| | * [[http://www.nxp.com/products/microcontrollers/cortex_m4/LPC4370FET256.html | LPC4370]] ARM Cortex-M4F based microcontroller, up to 204 MHz, 80 Msps 12-bit ADC that supports six singled ended channels or one differential channel – for fast analog data acquisition. Cortex-M0 based peripheral handler.\\ Two C_CAN 2.0B controllers. |
| | * [[ http://www.nxp.com/products/microcontrollers/cortex_m3/series/LPC1500.html |LPC15xx]] micro-controllers based on ARM Cortex-M3 processor. Up to 256 kB flash and 36 kB SRAM; 4 kB EEPROM; FS USB, 1 x C_CAN, RTC, SPI, USART, I2C @72MhZ. \\ 32K ROM with API support for C_CAN drivers and Bootloader including via CAN. [[http://www.nxp.com/documents/data_sheet/LPC15XX.pdf | Data Sheet]]. |
| ===== DSPs ===== | ===== DSPs ===== |
| |
