Welcome to the CAN-bus Wiki project

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
controllers:nxp [2018/10/25 13:49]
heinz [32 bit Controllers] added i.MX RT1060]
controllers:nxp [2020/05/04 11:32] (current)
heinz [32 bit Controllers] added LPC55S1x/LPC551x
Line 11: Line 11:
  
 ===== 32 bit Controllers ===== ===== 32 bit Controllers =====
 +  * [[ https://​www.nxp.com/​products/​processors-and-microcontrollers/​arm-microcontrollers/​general-purpose-mcus/​lpc5500-cortex-m33/​lpc551x-s1x-baseline-arm-cortex-m33-based-microcontroller-family:​LPC551X-S1X | LPC55S1x/​LPC551x ​ ]]ARM Cortex-M33 based MCU family, up to 256 KB on-chip flash, up to 96 KB of on-chip SRAM, @up to 150 MHz. CASPER Crypto co-processor,​ Flexcomm Interface for SPI. I2C, I2S, USART. USb-2 Interfaces,  CAN FD module with dedicated DMA controller and  ISO 11898-1 :-) \\ LPC55S16-EVK LPCXpresso55S16 Development Board **with** CAN **Transceiver**
   * [[ https://​www.nxp.com/​products/​processors-and-microcontrollers/​arm-based-processors-and-mcus/​i.mx-applications-processors/​i.mx-rt-series/​i.mx-rt1060-crossover-processor-with-arm-cortex-m7-core:​i.MX-RT1060| ​ i.MX RT1060]] so called Cross-Over processor, 2x classic CAN, 1x CAN FD, ARM Cortex-M7@ 600 MHz, 1MB On-Chip SRAM - up to 512KB configurable as Tightly Coupled Memory (TCM), Low-power run modes at 24MHz. :-)   * [[ https://​www.nxp.com/​products/​processors-and-microcontrollers/​arm-based-processors-and-mcus/​i.mx-applications-processors/​i.mx-rt-series/​i.mx-rt1060-crossover-processor-with-arm-cortex-m7-core:​i.MX-RT1060| ​ i.MX RT1060]] so called Cross-Over processor, 2x classic CAN, 1x CAN FD, ARM Cortex-M7@ 600 MHz, 1MB On-Chip SRAM - up to 512KB configurable as Tightly Coupled Memory (TCM), Low-power run modes at 24MHz. :-)
  

QR Code
QR Code controllers:nxp (generated for current page)