Welcome to the CAN-bus Wiki project

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
Next revisionBoth sides next revision
controllers:spansion [2014/12/02 10:41] – [Spansion] heinzcontrollers:spansion [2016/01/15 11:38] – [Traveo automotive MCU portfolio] OTA explained heinz
Line 1: Line 1:
-==== Spansion ====+====== Cypress (Spansion / Fujitsu)  ======
  
 [[https://www.spansion.com/Products/microcontrollers/Pages/default.aspx| Spansion]] microcontrollers took over [[http://www.fujitsu.com/us/semiconductors/microcontrollers/index.html | Fujitsu FMEA]] in 2013. [[https://www.spansion.com/Products/microcontrollers/Pages/default.aspx| Spansion]] microcontrollers took over [[http://www.fujitsu.com/us/semiconductors/microcontrollers/index.html | Fujitsu FMEA]] in 2013.
  
-On December 1st 2014 Spansion merged with Cypress. Cypress offered in the past controllers with CAN with its PSoC series.+On December 1st 2014 Spansion merged with [[http://www.cypress.com | Cypress]]. Cypress offered in the past controllers with CAN with its PSoC series.
 These controllers are added here. These controllers are added here.
  
Line 14: Line 14:
  
 ===== 8 bit Controllers ===== ===== 8 bit Controllers =====
 +
 +  * [[ http://www.cypress.com/psoc3/?source=CY-ENG-HEADER | PSoC 3]] (Cypress)  Single-Cycle 8051 core up to 67 MHz supplemented with programmable PLD-based logic.\\  For CAN see the [[ http://www.cypress.com/?docID=44342| application note]].
  
 ===== 16 bit Controllers ===== ===== 16 bit Controllers =====
  
 +Fujitsu offered many 16bit derivates.
 ===== 32 bit Controllers ===== ===== 32 bit Controllers =====
  
 +  * Feb/2015 Spansion announced Cortex®-M7 family
  
-    * [[http://www.fujitsu.com/global/services/microelectronics/product/micom/roadmap/industrial/fm3/|FM3 MCU family]] based on Cortex-M3, +==== Traveo automotive MCU portfolio ==== 
-      * MB9 [AB] Fxwhere x is   + 
-          * 1: Without USB/CAN  +The latest productsannounced Jan 2016, enabling over-the-air (OTAsoftware upgradesThis is achieved by designing an MCU capable of talking to two separateexternal flash memory units over a single HyperBus integrated in the MCU. While one flash memory unit retains the previous version of softwareanother will store new updates. If something goes wrongyou can always “roll back to the previous version,”.
-          * 4: With CAN +
-          * 5: With USB & CAN  +
-          * D: Dual EtherMAC & USB & CAN +
-      * MB9BF506A for inverter control. +
-      * [[http://edevice.fujitsu.com/fj/DATASHEET/e-ds/MB9BF524M-DS706-00048-0v01-E.pdf|MB9B520M Series (PDF)]] max2 CAN channels. +
-      * MB9A420L/120L Series Features CAN Communications, Energy-efficiency +
-    * FM4 MCU family based on Cortex-M4 +
-     * S6E2C series MCU Cortex®-M4F based with one CAN FD :-) channel and up to two channels classic CANup to 200 Mhz CPU, up to 2 MiB FLASH, 192 KiB SRAM, [[http://www.spansion.com/downloads/S6E2CC_DS709-00009-E.pdf | Data Sheet]]. (available in the first quarter of 2015) +
-    * ARM Cortex-M7 - announced at Electronica 2014 in Munichhopefully with CANand CAN FD   +
-    * FM0+ MCU Family based on Cortex-M0+  (does this family have CAN members?)+
  
   * [[http://www.spansion.com/Products/microcontrollers/32-bit-ARM-Core/Traveo| Traveo™]] S6J3100 family of ARM Cortex R5 based dual-core controllers @200 MHz. up to three CAN channels. Already CAN FD :-)   * [[http://www.spansion.com/Products/microcontrollers/32-bit-ARM-Core/Traveo| Traveo™]] S6J3100 family of ARM Cortex R5 based dual-core controllers @200 MHz. up to three CAN channels. Already CAN FD :-)
     * S6J311EJAA, CAN controller: CAN FD, Max 2 channel, CAN Clock Max 40MHz, 192 message buffers/channel, data bit rate max 5 Mbit/s     * S6J311EJAA, CAN controller: CAN FD, Max 2 channel, CAN Clock Max 40MHz, 192 message buffers/channel, data bit rate max 5 Mbit/s
 +    * [[http://www.newelectronics.co.uk/electronics-news/traveo-automotive-mcu-portfolio-expanded/112483/?sf43792366=1 | S6J33XX]]  ARM Cortex-R5 processor running at 240MHz, 4MiB FLASH, MOST, Ethernet, six CAN-FD :-) channels, ISO26262 safety features,Clock Extension Peripheral Interface (CXPI)
 +
 +==== Others (Industrial) ====
 +
 +  * [[http://www.spansion.com/Products/microcontrollers/32-bit-ARM-Core/fm4/Pages/overview_32fm4.aspx | FM4]] MCU family based on Cortex®-M4
 +    * S6E2C-Series @200 MHz, 2.7 - 5.5V, 2 CAN, up to 2 MiB FLASH, 192 KiB SRAM, 1 CAN FD\\  [[http://www.spansion.com/downloads/fm4_mn709-00004-e.pdf | 32BIT MICROCONTROLLER FM4 Family Communication Macro Part]],  CHAPTER 5-2 CAN Controller, CHAPTER 5-3 CAN FD CONTROLLER :-) \\ The current manual (Dec 2015) states **is non-ISO CAN FD**\\  [[http://www.spansion.com/products/microcontrollers/32-bit-arm-core/fm4/Pages/S6E2CCAL0AGL20000.aspx | S6E2CC]] / [[http://www.spansion.com/downloads/S6E2CC_DS709-00009-E.pdf | Data Sheet]]
 +    * S6E2G-Series @180 MHz, 2.7 - 5.5V, 1 CAN
 +    * S6E2H-Series @160 MHz, 2.7 - 5.5V, 2 CAN
 +  * [[http://www.spansion.com/Products/microcontrollers/32-bit-ARM-Core/fm3/Pages/overview_32fm3.aspx |FM3 MCU family]] based on Cortex-M3,
 +    * MB9 [AB] Fx, where x is  
 +        * 1: Without USB/CAN 
 +        * 4: With CAN
 +        * 5: With USB & CAN 
 +        * D: Dual EtherMAC & USB & CAN
 +    * MB9BF506A for inverter control.
 +    * [[http://edevice.fujitsu.com/fj/DATASHEET/e-ds/MB9BF524M-DS706-00048-0v01-E.pdf|MB9B520M Series (PDF)]] max. 2 CAN channels.
 +    * MB9A420L/120L Series Features CAN Communications, Energy-efficiency
 +  * ARM Cortex-M7 - announced at Electronica 2014 in Munich, hopefully with CAN, and CAN FD  
 +  * FM0+ MCU Family based on Cortex-M0+  (does this family have CAN members?)
 +
 + 
  
   * [[http://www.spansion.com/Products/microcontrollers/32-bit-ARM-Core/FCR4/Pages/overview_32fcr4.aspx | FCR4]] Cortex-R4 based family with 3 CAN interfaces implementing the BOSCH [[controllers:c_can | C_CAN]].   * [[http://www.spansion.com/Products/microcontrollers/32-bit-ARM-Core/FCR4/Pages/overview_32fcr4.aspx | FCR4]] Cortex-R4 based family with 3 CAN interfaces implementing the BOSCH [[controllers:c_can | C_CAN]].
Line 41: Line 56:
     * MB9DF125 //Atlas-L//     * MB9DF125 //Atlas-L//
     * MB9EF226 //Titan//     * MB9EF226 //Titan//
 +
 +  * [[ http://www.cypress.com/psoc5lp/?source=CY-ENG-HEADER|PSoC 5LP]] (Cypress) is a low power ARM® Cortex™ - M3 based programmable system on chip supplemented with programmable PLD-based logic.\\ For CAN see the [[ http://www.cypress.com/?docID=44342| application note]].
 +
  
 ===== DSPs ===== ===== DSPs =====

QR Code
QR Code controllers:spansion (generated for current page)